Protect computers, networking equipment, routers, modems, NAS devices, and other compatible electronics during power outages and electrical disturbances with the APC Back-UPS BE600M1 600VA / 330W Battery Backup & Surge Protector.
The APC BE600M1 provides seven AC outlets, including five battery-backup-and-surge-protected outlets and two surge-only outlets, plus a convenient USB-A charging port for compatible mobile devices. It also provides 490-joule surge protection and user-replaceable battery capability.
Condition
Used – Very Good
This pre-owned APC Back-UPS BE600M1 has been inspected and is in very good cosmetic and working condition. It may show minor signs of previous use that do not affect normal operation.
Please review all actual product photographs carefully for the exact cosmetic condition and included components.
What's Included
- APC Back-UPS BE600M1 600VA Battery Backup / Surge Protector – Black
USB data cable, user manual, original retail box, and other accessories are included only if specifically shown in the actual product photographs.
Key Features
- APC Back-UPS BE600M1 uninterruptible power supply
- 600VA / 330W power capacity
- Seven NEMA AC outlets
- Five battery-backup + surge-protected outlets
- Two surge-only outlets
- 490-joule surge protection rating
- One USB-A smart charging port
- USB charging output up to 1.5A
- USB charging continues during battery operation
- Data-line surge protection
- Audible UPS status alarms
- LED status indication
- User-replaceable battery
- Compatible replacement battery: APC APCRBC154
- USB communication support for compatible APC power-management software
- Wall-mount capability
- Compact desktop design
- Black finish
600VA / 330W Battery Backup
The APC BE600M1 provides up to 600VA / 330 watts of backup power for compatible computers, networking equipment, routers, modems, storage devices, and other electronics.
During a utility outage, the UPS automatically supplies battery power to equipment connected to its battery-backup outlets, providing time to remain connected temporarily or shut down compatible equipment safely.
Seven Protected AC Outlets
The BE600M1 provides a total of seven AC outlets:
-
Five outlets: Battery Backup + Surge Protection
-
Two outlets: Surge Protection Only
This arrangement allows critical devices to receive temporary battery power while less critical equipment can remain protected from electrical surges.
490-Joule Surge Protection
The BE600M1 provides a 490-joule surge-energy rating to help protect connected electronics from damaging voltage spikes and electrical surges.
USB-A Charging Port
A built-in USB-A charging port provides up to approximately 1.5A for compatible phones and other USB-powered devices.
The USB charging port can continue supplying power while the UPS is operating from its internal battery during a power outage.
Typical Battery Runtime
Battery runtime depends heavily on the connected electrical load and the condition of the internal battery.
Manufacturer and retailer specifications indicate approximately:
-
About 23 minutes: At approximately 100W load
-
About 12 minutes: At approximately half load
-
About 3 minutes: Near full rated load
Important: Because this is a pre-owned UPS, actual runtime may be lower than original factory specifications depending on battery age, previous use, charge state, temperature, and connected load.
User-Replaceable Battery
The BE600M1 uses a user-replaceable internal sealed lead-acid battery.
Schneider Electric specifies APCRBC154 as the replacement battery cartridge for the BE600M1.
Battery runtime naturally decreases as rechargeable batteries age. If backup runtime becomes significantly reduced, battery replacement may be required.
USB Computer Communication
The BE600M1 supports USB communication with compatible APC power-management software for functions such as UPS monitoring and graceful computer shutdown during extended power outages.
A USB data cable is included only if specifically shown in the actual product photographs.
Audible & LED Status Alerts
LED status indicators and audible alarms provide information about utility power, battery operation, overload conditions, low battery status, and other UPS operating conditions.
Wall or Desktop Installation
The compact enclosure can be used on a desktop, floor, or other suitable surface. Integrated keyhole mounting points also allow compatible wall installation where appropriate.
Important Equipment Compatibility Information
The BE600M1 uses a step-approximated battery output waveform and is intended primarily for computers, networking equipment, and compatible electronic peripherals.
Schneider Electric advises that this UPS is not intended for motor-driven equipment.
Always verify the power requirements and UPS compatibility of your connected equipment before use.
Product Information
-
Brand: APC by Schneider Electric
-
Product: Back-UPS 600VA Battery Backup & Surge Protector
-
Model / MPN: BE600M1
-
UPC / GTIN-12: 731304325116
-
GTIN-14: 00731304325116
-
ASIN: B01FWAZEIU
-
Product Type: Uninterruptible Power Supply / UPS Battery Backup
-
Color: Black
-
Condition: Used – Very Good
-
Power Capacity: 600VA / 330W
-
Input / Output Voltage: 120V AC
-
AC Outlets: 7
-
Battery Backup Outlets: 5
-
Surge-Only Outlets: 2
-
Surge Rating: 490 Joules
-
USB Charging: USB-A, up to 1.5A
-
Battery Chemistry: Sealed Lead Acid
-
Replacement Battery: APC APCRBC154
-
Power Cord Length: Approximately 5 ft
Approximate Dimensions & Weight
-
Width: 10.79 inches
-
Height: 5.47 inches
-
Depth: 4.13 inches
-
Weight: Approximately 7.7 lb
Important Purchase Information
This listing is for an APC Back-UPS BE600M1 600VA / 330W UPS in Black, Used – Very Good condition.
Because this product contains a rechargeable sealed lead-acid battery, actual backup runtime may vary from original factory specifications depending on battery age and condition.
USB data cable, printed documentation, original retail box, and other accessories are included only if specifically shown in the actual product photographs.
Please review all actual photographs carefully before purchasing for the exact cosmetic condition and included components.
